Show News
Home > Show News >

HotPurge Inflatable Pipe Purging System

Release time:2017-03-13 14:55 Click:59
High strength steel joints must pre-heated prior to welding and also require a post-weld at treatment. Weld joints of this nature are often purged of oxygen and welded in an inert atmosphere to reduce the risk of sugaring, an imperfection that could allow metal pieces to break off inside pipework and cause damage to turbines, for example. With the high temperatures and length of time at such temperatures, most weld purging systems are unsuitable. HotPurge has been developed by International Weld Purging Specialists Huntingdon Fusion Techniques HFT, an Inflatable Pipe Purging System for Heat Treated Chrome and High Strength Stainless Steel Pipe Joints where the temperatures might be as high as 760°C (1,400°F) for many hours. Luke Keane, Distributor Support for HFT said: "HotPurge allows the purge to be safely continued for up to 24 hours whilst pre-heating, welding and post weld heat-treating with the purge system remaining in place. Along with our other ranges of Inflatable Pipe Purging Systems, the HotPurge Systems are manufactured in the UK, with scientific knowledge and research invested in each of our products. We do not sacrifice quality! You can be sure to achieve perfect welds, time and time again."
HotPurge includes PurgeGate, a revolutionary device to prevent over inflation of, and damage to the inflatable dams. No matter how high the user increases the pressure, in order to deliver more gas flow, PurgeGate prevents too much pressure being delivered to the inflatable dams, allowing an increased flow, to achieve a lower oxygen level or faster cooling of the weld zone.
HotPurge ensures the purge space remains tightly sealed at all times as the inflatable dams maintain an even seal throughout the weld cycle, irrespective of pressure rises or excessive flow rates of argon gas. The large central collar dramatically reduces the space to be purged and makes it easier to reach lower oxygen levels faster than with conventional purging systems. Each HotPurge System incorporates an innovative central band for easy positioning inside the pipe. This band, known as RootGlo, will illuminate inside the dark pipe, for up to 20 hours, with only 10 minutes previous exposure to daylight. HotPurge Systems are manufactured to suit pipe diameters from 6 to 96" (150 to 2,440 mm) and both inflatable dams have pull handles securely sewn with high temperature resistant Kevlar thread that will withstand a pulling force of 1,000 lb. These HotPurge Inflatable Pipe Purging Systems can be used repeatedly for weld purging and will keep the oxygen levels below 100 parts per million (ppm) throughout the welding cycle, ensuring oxide and coke free welds, without the metallurgical imperfections caused by exposure to too much oxygen.
00 00 00 00
  • Overview

     

    General Information

    Organizers

    Quick Facts

  • For Exhibitors

     

    Exhibits

    How to exhibit

    Stand Type

    Advertising Service

    Buyers Constitution

  • For Visitors

     

    Visit Guide

    Pre-registration

    VIP Buyers

    To be VIP Buyer

  • Concurrent Activities

    Technical Seminar

    Product Promotion

    Market Forum

  • Previous Review

     

    Overseas Agents

    Media Partner

  • Service Center

     

    Logistics

    Construction Guide

    Hotel

    Traffic Information

    Exhibition Hall Parameter

  • Download Center

     

    Exhibitor Registration Form

    Exhibitor Manual

    Visitor Registration Form

    Post Show Report

  • Contact Us

  • 主办单位:北京海闻展览有限公司
    BEIJING HIVEN EXHIBITION CO.,LTD